BMBMZ - BANVEL BROADSIDE HERBICIDE
- MSDS: BMBMZ
- Manufacturer: NUFARM LTD
- Product Name: BANVEL BROADSIDE HERBICIDE
- National Stock Number: 6840-00N025496
Product Identification
Product ID:BANVEL BROADSIDE HERBICIDE
MSDS Date:09/07/1988
FSC:6840
NIIN:00N025496
MSDS Number: BMBMZ
Responsible Party
KWINANA, W. A.
US
Emergency Phone: 008-033498
Info Phone: 09-419-2199
Preparer: M.G. BRADBURY
Cage: NFARM
Contractor
Telephone: 008-033498
Cage: NFARM
Ingredients
ACETIC ACID, ((4-CHLORO-O-TOLYL)OXY)-, ISOOCTYL ESTER;
CAS: 26544-20-7
RTECS: AG2282000
Fraction By Weight: 28%
BENZONITRILE, 3,5-DIBROMO-4-OCTANOYLOXY-; (BROMOXYNIL
CAS: 1689-99-2
RTECS: DI3325000
Fraction By Weight: 20.4%
BENZOIC ACID, 3, 6-DICHLORO-2-METHOXY-; (DICAMBA) LD50
CAS: 1918-00-9
RTECS: DI7525000
Fraction By Weight: 4%
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:LD50: (ORAL RAT) 1400 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MODERATELY TOXIC. INHAL: A MOD HAZ &
CARE SHLD BE TAKEN TO AVOID INHAL OF SPRAY MISTS. SKIN: PRLNGD/RPTD
EXPOS MAY CAUSE DEFATTING OF SKIN WHICH WOULD LEAD TO SECONDARY
DERMAT. EYE: WILL CAUSE SEVERE IRRITATION. INGEST: ACTIVE INGRED
PRESENTS A MODERATE HAZARD WHILE EXCESSIVE, PRLNGD EXPOS MAY
CAUSE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CHRONIC EFTS. HEADACHE, NAUSEA AND
VOMITING FORM SOLVENT, HOWEVER, OTHER THAN FEVER EFTS OF A.I. ARE
POORLY DOCUMENTED. CHRONIC: WEIGHT LOSS & DMG TO LIVER & KIDNEYS
MAY BE EXPECTED IF EXPOS URE IS EXCESSIVE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IRRIGATE FOR AT LEAST 15 MINUTES WITH COPIOUS AMOUNTS
OF WATER WITH EYELIDS OPEN. SKIN: REMOVE CONTAMD CLTHG & LAUNDER
BEFORE REUSE. WASH AFFECTED AREAS THOROUGHLY WITH SOAP & WATER.
INHAL: REMO VE TO FRESH AIR UNTIL RECOVERED. INGEST: INDUCE
VOMITING. USE IPECAC SYRUP IF NECESSARY. NOTE TO MD: TREAT
SYMPTOMATICALLY. IF VOMITING OCCURS SOLVENT PRESENT MAY CAUSE
PULMONARY PNEUMONITIS.
Fire Fighting
Flash Point Method:PMCC
Flash Point:167F,75C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:WATER FOG, "ALCOHOL" FOAM, CO*2, DRY CHEMICAL, BCF.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . KEEP UPWIND.
Unusual Fire/Explosion Hazard:WILL EMIT TOX FUMES OF H BROMIDE, H
CHLORIDE, H CYANIDE/OTHER CMPDS OF BROMINE, CHLORINE & NITROGEN IF
INVOLVED IN FIRES/EXPOS TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:CONTAIN SPILL AND ABSORB WITH SAND OR
PROPRIETARY ABSORBENT (VERMICULITE). PREVENT FROM ENTERING DRAINS,
WATERWAYS OR SEWERS. COLLECT IN SEALED OPEN TOP CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NOT TO BE TAKEN. KEEP OUT OF REACH OF CHILDREN. READ
SAFETY DIRECTIONS BEFORE OPENING. DO NOT USE BANVEL BROADSIDE IN
CLOSE PROX TO VINES, TOMATOES & OTHER SUSCEPTIBLE CROPS INCLUDING
FLOWERS, VEGETAB LES, ORNAMENTALS, LUPINS & FRUIT TREES.
Exposure Controls
Respiratory Protection:AN "AGRICULTURAL" MASK SHOULD BE WORN DURING
SPRAYING OPERATIONS. USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NATURAL ONLY.
Protective Gloves:PVC/NEOPRENE RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR LONG SLEEVES, LONG TROUSERS AND
SUITABLE FOOTWEAR.
Work Hygienic Practices:WASH EXPOSED PARTS OF THE BODY THOROUGHLY AFTER
USE AND BEFORE EATING, DRINKING AND SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>374F,>190C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:0
Vapor Density:5 SOLVENT
Spec Gravity:1.089
Evaporation Rate & Reference:0.02 (BUAC=1)
Solubility in Water:EMULSIFIES
Appearance and Odor:CLEAR, DARK-BROWN LIQUID WITH TYPICAL SOLVENT ODOR.
Percent Volatiles by Volume:39
Stability
Stability Indicator/Materials to Avoid:YES
CHLORINE AND INORGANIC PEROXIDES.
Stability Condition to Avoid:MAY REACT VIOLENTLY WITH STRONG OXIDIZING
AGENTS.
Hazardous Decomposition Products:ONLY EXPECTED WHEN MATERIAL IS
INVOLVED IN FIRES OR EXPOSED TO EXTREME HEAT.
Disposal
Waste Disposal Methods:BY INDUSTRIAL INCINERATION OR DUMPING AT A SITE
APPROVED BY LOCAL, STATE AND FEDERAL AUTHORITIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.